Headwinds: Butt Splices - Headlight Connector to Wire Harness (Set of 3)

Product Search

Butt Splices - Headlight Connector to Wire Harness (Set of 3)

Click thumbnail on the right to see a full-size version

Quantity in Basket: None
Code: 8-0902A
Price: $4.95

Quantity:

20 MINUTES OF SOLDERING TAKES ONLY 5 MINUTES WITH POSI-LOCKS!
For use when working in hard-to-reach or confined spaces or if you don't like to solder.

FEATURES:
• For use with 18 awg (average wire gauge)
• No crimping required
• Reusable
• Connectors simply hand tighten
• Provides a strong mechanical and electrical connection
• Connector passes the wire pull test
• Each connector has two caps and one barrel
• Sold in a set of 3 (for 1 headlight connector)

Photo #2: Butt splice cap
Photo #3: Butt Splice barrel with metal center conductor
Photo #4: Shows the three steps to use when connecting wires with butt splice:
    Step 1. Strip 1/4" of insulation off end of wire and insert into the cap until 1/8" of wire showing (Photo #2)
    Step 2. Screw the cap and into barrel (photo #3)
                The wire is now pinched between the cap and the center conductor of the barrel (Photo #3)

IT'S THAT SIMPLE!