Skull Headlights
Click pictures for details



ATTENTION BIG DOG OWNERS

ISSUE: Big Dog Motorcycles with Electronic Harness Control (EHC) require the high & low beam headlights
draw 5 & 4 amps respectively, if they do not the lights will not function properly (they will flash or pulsate) or
may not work at all. If hooking up a relay, the solenoid will not draw enough amps to activate the EHC.

SOLUTION: Install a relay and add an 10 amp in-line fuse to the lights in the eyes, and install a 20W (.139 OHM)
resistor in-line between the relay & Hi/Lo switch.